<<Back to Accessories
Helpful Instructions
for Cleaning:
The advanced design makes accessing and cleaning your reservoir easy. Just
grip the handle, then unscrew.
This is a complete kit for the reservoir and tube.
1. Fill the bladder with water ¾ full.
2. Add 2 Milton’s tablets to the water
3. Replace the Cap on the Bladder.
4. Shake the bladder back and forth, allow to soak for 5 minutes then,
5. Use the Large Nylon Brush to scrub the inside of the bladder.
6. Use the smaller nylon brush and spring wire to clean inside the mouth
piece, cap and tube.
7. Empty the Bladder
8. Rinse well with cool water.
9. Insert the Hanger/Dryer into the Bladder and hang to dry.
10. Allow reservoir and tube to dry before storing.
1  |
2  |
3  |
4  |
5  |
6  |